മെറ്റൽ കട്ടിംഗ് ചിഹ്നം സി‌എൻ‌സി ഫൈബർ ലേസർ കട്ടിംഗ് മെഷീൻ

I. Features of morn ഫൈബർ ലേസർ കട്ടിംഗ് മെഷീൻ for metal:

---

1. Great Performance: Identical cutting quality on any cutting point is realized through fiber transmission.
2.High Efficiency: The rapid cutting speed is two times higher than that of CO2 laser machine. Its use-cost is very low.
3.Low Consumption of Gas: Laser cutting does not make any gas because of the specific cutting technology on steel plate.
4.Low Consumption: It is environment-protecting and energy-saving, power consumption is reduced by 20%-30% compared with CO2 laser.
5.Maintenance-free: The machine is maintenance-free, there is almost no any parts need to change after long term use.

II. Application of ACCURL ഫൈബർ ലേസർ കട്ടിംഗ് മെഷീൻ for metal and sample photos.

---

Professional for stainless steel, carbon steel as well as other metal sheet cut, widely used in metal cutting, electrical switch manufacturing, aerospace, food machinery, textile machinery, engineering machinery, locomotive manufacturing, agriculture and forestry machinery, elevator manufacture, special vehicles, houshold appliances, toos, processing, IT manufacturing, oil machinery, food machinery, diamond tools, welding, welding gear, metal materials, decoration adverting, laser surface treatment of foreign processing services, such as all kinds of machinery processing industry.

III. Technical parameter

---

ലേസർ ടെക്നോളജി: ലേസർ ഫ്ലേം കട്ടിംഗ്
Model:  Fiber Metal Laser Cutting Machine
Power: 250-2000W Optional
പ്രവർത്തന മേഖല: 1500*3000 മിമി
Source: Fiber Generator
Laser Brand: Raycus, Ipg, Nlight Optional
Cutting Speed: Max 80m/Min
Min Line Width: 0.01mm
Cutting Accuracy: 0.01mm
Weight: 5000kg
Warranty: 3 Years
Transport Package: Container
Specification: 20" container
ഉത്ഭവം: ചൈന
എച്ച്എസ് കോഡ്: 8456110090

ജോലി ചെയ്യുന്ന സ്ഥലം	1300 * 2500 മിമി	1500 * 3000 മിമി	2000 * 4000 മിമി
ലേസർ പവർ	250W, 500W, 700W, 1000W, 1500W, 2000w for option
ലേസർ തരം	Fiber generator (Domestic or Imported for option)
Intelligent memory	Store unlimited files up to 128 MB
ലേസർ തല	Automatic following laser head
നിയന്ത്രണ സംവിധാനം	PC control with Cypcut or imported controller and software
ഡ്രൈവ് സിസ്റ്റം	Japan Fuji, Yaskawa, Panasonic servo motor and drivers
റിഡ്യൂസർ	Equipped with the imported reducer, with higher quality
Compatible software	Coreldraw, AuotCAD, Photoshop
ഗ്രാഫിക് ഫോർമാറ്റ്	BMP, PLT, DST, AI, DXF, etc
മിഴിവ്	4500 dpi
കുറഞ്ഞ വരിയുടെ വീതി	≤0.01mm
സ്ഥാന കൃത്യത	0.01 മിമി
Speed and power control	Computer or manually controlled speed, max up to 80m/min, and power in 1% increments to 100%.
Print interface	Ethernet or USB interface. Compatible with Windows 8 / 7 / XP, etc
Electrical requirements	AC 220V ± 10% or 380V ± 10%

IV.. Specifications of ACCURL ഫൈബർ ലേസർ കട്ടിംഗ് മെഷീൻ for metal and design photo

---

1. Drive system: 4sets driver and motors. X by 1000w, Y by double 1500w(or double 2000w), Z 400w Japan Servo
2. Control system: Cypcut control system
3. Water chiller: 5P for 1000w-2000w (1.2P or 2P for lower power)
4. Transmission: XY by gear, Z by ball screw
5. Guide rail: PMI guide rail from Taiwan
6. Machine weight: total 5000kg for whole machine
7. Machine working size: 3000*1500mm
8. Rotary is optional and customized, according your tube length and diameter
9. Protecting lens, cutting mouth, focus lens and Ceramic ring is optional parts

ടാഗുകൾ‌: പ്ലാസ്മ മെറ്റൽ കട്ടിംഗ് മെഷീൻ